CreteAngle Model 'S' Forced Action Pan Mixer 14 litre mix capacity - CreteAngle - Forced Action Pan Mixers

Free Local Delivery!

Call us today +44 (0) 1903 241 349 or email us

Model 'S' Forced Action Pan Mixer

The original and best mixer for laboratory test material mixing.

Recommended Mix Capacity: 14litres, 0.5cu.ft

Total Pan Volume: 27litres, 0.98cu.ft


FREE Local Delivery! More details

If the delivery postcode starts with any of the following you quality for free delivery carried out by our own fleet of vehicles.

Brighton and Worthing:

BN1, BN2, BN3, BN4, BN5, BN6, BN7, BN10, BN11, BN12, BN13, BN14, BN15, BN16, BN17, BN18, BN41, BN42, BN43, BN44, BN45

Portsmouth, Chichester and Bognor: PO18, PO19, PO21, PO22

Horsham and Haywards Heath: RH13, RH15, RH16, RH20


The CreteAngle® Multiflow Forced Action Pan Mixer Model 'S' has been designed for use in material testing laboratories/universities or in locations where only small quantities of mix are required, such as cement, concrete (including HS, HPC, UHPC, SFRC), resins (acrylic, epoxy, polyester etc) and polymers; giving consistent and fast results.  This mixer works efficiently with dry, semi-dry or viscous materials to a maximum of 10mm aggregate grading. The action is positive and rapid and the blades are designed to thoroughly mix the contents of the pan both horizontally and vertically; normally within 1 minute or under.


ENQUIRE

Data Sheet

Product Information

The CreteAngle® Multiflow Forced Action Pan Mixer Model 'S' designed for use in material testing laboratories/universities or in locations where only small quantities of mix are required, such as:

  • Cement
  • Concrete – HPC, UHP and Limecrete
  • Resins (acrylic, epoxy, polyester etc) and polymers

The forced action mixer is easy to operate and maintain and is highly efficient in a mixing cycle involving dry, semi-dry or viscous materials to a maximum of 10mm aggregate grading.

The pan can be removed from the turntable with a pan-carrying handle. This accessory enables a number of pans to be used, which besides increasing output, makes it easy to deal with different types of mix without stopping to clean the pan. The pan can also be tipped and the load discharged when using the pan-carrying handle.

The mixing pan and blades are guarded with a Safety Headguard supplied with the mixer. The Headguard has a mesh aperture through which additional material may be added and the mix viewed.

The mixing blades are hard-faced on the leading edges to prolong life.

The Model 'S' can be supplied with high efficiency EU manufactured electric motors suitable for any power supply.

The mixer is easy to operate and maintain. The materials and components used are of the highest quality. With their proven reliability CreteAngle® Forced Action Mixers give consistent results, long life and minimum maintenance. Spare parts are readily available from stock.

Optional Extras:

  • Extra Pans
  • Pan Carrying Handle
  • Mild Steel Stand


ENQUIRE NOW

Let us know what you are looking for and we will get back to you.